FRIGIDAIREDISHWASHER

Frigidaire · Dishwasher

Frigidaire i30 error code

Leak in the bottom pan

Water has leaked or overflowed into the bottom pan of the dishwasher.

Also shown as E30

Easy to misread as 130 Check with the decoder

Worth repairing?

Deal with it now

Water is escaping inside the dishwasher, where it can reach the floor and the cabinets. Find the leak before you run it again.

Can you do it yourself?

Moderate

About 30 minutes

Before you start

  • Unplug it before you touch anything inside.
  • Turn the tap off before you undo any hose or filter.

What to check, in order

  1. Check the water valve connections

    Look for loose connections at the water inlet valve. The supply hose should be secure there, with no kinks.

  2. Check it's level

    The dishwasher needs to be properly levelled.

  3. Check the detergent

    Use dishwasher detergent only: dish or hand soap over-suds and can leak. Use the recommended amount or 1 tablet, and don't fill past the dispenser's max line.

  4. Reset it

    Press Cancel, or turn the power off at the breaker for 5 minutes.

When to call an engineer

If the code comes back, contact Frigidaire for service. If it was installed in the last 30 days, contact the installer first.

Good to know

  • Some Frigidaire dishwashers show E30 for the same fault. Frigidaire's 2023 use & care guide gives it the same meaning.

Checked against

Last reviewed September 2026. Manufacturers update their pages, and your manual is the final word.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e