FRIGIDAIREDISHWASHER

Frigidaire · Dishwasher

Frigidaire i20 error code

Not draining properly

The dishwasher didn't drain completely.

Also shown as E20

Easy to misread as 120 Check with the decoder

What to check

Checked against 3 official sourcesReviewed October 2026

Worth repairing?

Usually free

It's almost always the hose, the knockout plug or dirty filters.

Can you do it yourself?

Easy

About 30 minutes

Before you start

  • Unplug it before you touch anything inside.
  • If it stopped mid-wash, let hot water cool before you drain it.
  • Watch for broken glass in the filter or pump.

What to check, in order

  1. New disposer? Check the knockout plug

    If the drain hose goes into a food waste disposer, the knockout plug inside the disposer inlet must have been removed.

  2. Check the drain hose

    It mustn't be blocked, pinched or restricted anywhere along its length.

  3. Check the hose height

    The drain hose must reach at least 32 in (81 cm) above the floor.

  4. Clean the filters

    Clear any food soil from the glass trap or filters, and from the sump area under them.

  5. Reset it

    Press and hold Cancel, turn the power off at the breaker, or unplug the dishwasher for 3 minutes. Then run it again.

When to call an engineer

If it still won't drain with the hose and filters clear, contact Frigidaire for service.

Good to know

  • Frigidaire's manual groups i20 with i40 and iF0: clogged filters or a restricted drain line.
  • Some Frigidaire dishwashers show E20 for the same fault. Frigidaire's 2023 use & care guide gives it the same meaning.

Parts people end up buying

Only if the checks above point to a part. Match it to your model number first: it's on a label on the edge of the door or the side of the tub.

Affiliate links: as an Amazon Associate I earn from qualifying purchases, at no extra cost to you. It never changes a verdict.

Quick answers

What does the Frigidaire i20 error code mean?

The dishwasher didn't drain completely.

Can I fix Frigidaire i20 myself?

Easy (about 30 minutes). Start with: new disposer? Check the knockout plug; check the drain hose; check the hose height. If it still won't drain with the hose and filters clear, contact Frigidaire for service.

Is Frigidaire i20 worth repairing?

Usually free. It's almost always the hose, the knockout plug or dirty filters.

Checked against

Last reviewed October 2026. Manufacturers update their pages, and your manual is the final word. Spotted a mistake? Email contact@appliance-error-codes.com.

Another code on the display?

Look it up in seconds

344 codes from 24 brands, each one checked against the maker's own manuals and support pages.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e