SAMSUNGWASHER

Samsung · Washing machine

Samsung tE error code

Temperature sensor fault

The sensor that reads the water temperature isn't giving sensible readings. It shows as tC on newer models and EC on older ones.

Also shown as tC EC

Worth repairing?

Worth fixing

The sensor is inexpensive and the rest of the machine is usually fine.

Can you do it yourself?

Tricky

5 minutes to reset

Before you start

  • Unplug it before you touch anything inside.

What to do

  1. Restart it

    Switch the washer off, wait a minute and start a new cycle. A one-off reading clears this way.

When to call an engineer

If it continues. The sensor is a cheap part, but it sits on the heating circuit, so for most people it's an engineer's job.

A repair visit will usually check the sensor's reading with a meter, then its wiring.

Before you book
  • Note the model and serial number. They're on a label inside the door, around the door frame or on the back.
  • Write down the exact code, and what the appliance was doing when it appeared.
  • Check whether it's still under warranty. If it is, the repair may cost you nothing.

Parts people end up buying

Only if the checks above point to a part. Match it to your model number first: it's on a label inside the door, around the door frame or on the back.

Affiliate links: as an Amazon Associate I earn from qualifying purchases, at no extra cost to you. It never changes a verdict.

Checked against

Last reviewed September 2026. Manufacturers update their pages, and your manual is the final word.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e