LGDISHWASHER

LG · Dishwasher

LG tE error code

Temperature sensor fault

The dishwasher can't trust its temperature reading. LG says the sensor has failed or lost contact, or the water went above 194°F (90°C).

Worth repairing?

Worth fixing

A temperature sensor is usually a modest part, but it needs an engineer to diagnose and fit it.

Got a quote? Check if it's worth paying

Can you do it yourself?

Engineer only

No home fix

Before you start

  • Unplug it before you touch anything inside.
  • If it stopped mid-wash, let hot water cool before you drain it.

What to do

  1. Switch it off

    LG gives no home fix for tE, so there's nothing to clean or reset. Turn the dishwasher off with the Power button.

When to call an engineer

Book a repair. LG says a technician needs to check the temperature sensor and its connection.

A repair visit will usually check the sensor's reading with a meter, then its wiring.

Before you book
  • Note the model and serial number. They're on a label on the edge of the door or the side of the tub.
  • Write down the exact code, and what the appliance was doing when it appeared.
  • Check whether it's still under warranty. If it is, the repair may cost you nothing.

Checked against

Last reviewed September 2026. Manufacturers update their pages, and your manual is the final word.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e