WHIRLPOOL · MAYTAGWASHER

Whirlpool & Maytag · Washing machine

Whirlpool F0E2 error code

Too many suds

The washer found too many suds, so the load may not be fully rinsed or spun.

Also shown as Sd SUd 5d

Same code on Maytag.

Worth repairing?

Not a fault

Nothing to repair. It's the detergent.

Can you do it yourself?

Very easy

No work, mostly waiting

Before you start

  • Low risk: nothing to open up.

What to check, in order

  1. Let it clear

    On front-loaders, Sud or Sd with the Rinse light on means the washer is clearing the suds. Let it carry on.

  2. Use HE detergent, and less of it

    Only HE detergent, and no more than the recommended amount.

  3. Avoid 'no splash' bleach

    Whirlpool warns against 'no splash' or 'easy-pour' chlorine bleach.

  4. Run Rinse/Spin

    To finish the load.

  5. Bulk dispenser?

    If your washer has one, check its concentration setting.

When to call an engineer

Only if it happens with the right detergent.

Parts people end up buying

Only if the checks above point to a part. Match it to your model number first: it's on a label inside the door, around the door frame or on the back.

Affiliate links: as an Amazon Associate I earn from qualifying purchases, at no extra cost to you. It never changes a verdict.

Checked against

Last reviewed September 2026. Manufacturers update their pages, and your manual is the final word.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e