ELECTROLUX · AEG · ZANUSSIWASHER

Electrolux, AEG & Zanussi · Washing machine

Electrolux EH0 error code

Power supply problem

The mains supply is out of range. EH1 is the frequency, EH2 means the voltage is too high and EH3 that it's too low.

Also shown as EHO EH1 EH2 EH3

Same code on AEG and Zanussi.

Worth repairing?

Usually free

Usually the supply, not the machine. Don't ignore it if other appliances misbehave too.

Can you do it yourself?

Very easy

About 5 minutes

Before you start

  • Unplug it before you touch anything inside.

What to check, in order

  1. Test the socket

    Plug in another appliance to check it works.

  2. No extension leads

    Plug the washer straight into the wall.

  3. Reset

    Unplug for 30 to 60 seconds and try again.

When to call an engineer

An electrician if the wiring is at fault, an engineer if the supply is fine and the error continues.

Checked against

Last reviewed September 2026. Manufacturers update their pages, and your manual is the final word.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e