DAIKINHEAT PUMP

Daikin · Heat pump

Daikin Altherma 80-00 error code

Return water temperature sensor fault

The sensor that measures the water coming back from your radiators or underfloor heating is giving a reading the heat pump can't use, so it has stopped.

Also shown as 80

What to check

Checked against 4 official sourcesReviewed October 2026

Worth repairing?

Worth fixing

Replacing a sensor is a fairly small job. If the hydro PCB is at fault it costs more, so ask for a quote.

Can you do it yourself?

Engineer only

Engineer visit

Before you start

  • Unplug it before you touch anything inside.

What it means

Daikin's guides call it a "Returning water temperature sensor problem". The service manual calls the sensor the inlet water thermistor and says the code resets automatically.

What to check, in order

  1. Read the help text

    On the controller, open the main menu and choose Malfunctioning to see the code and a short description. The help button gives a longer one. Note the code for your installer.

  2. Use emergency heating if you need it

    Daikin's user reference guide says the backup heater can take over the heating when the heat pump fails. If emergency mode is set to Manual, you confirm this on the Malfunctioning screen. Expect higher electricity bills while it runs.

When to call your installer

Call your installer. Daikin's service manual lists a faulty inlet water thermistor or a faulty hydro PCB as the causes.

A repair visit will usually check the sensor's reading and its wiring.

Before you book
  • Note the model and serial number. They're on a label on the rating plate on the outdoor unit, and on the indoor unit or cylinder.
  • Write down the exact code, and what the appliance was doing when it appeared.
  • Check whether it's still under warranty. If it is, the repair may cost you nothing.

Quick answers

What does the Daikin Altherma 80-00 error code mean?

The sensor that measures the water coming back from your radiators or underfloor heating is giving a reading the heat pump can't use, so it has stopped. Daikin's guides call it a "Returning water temperature sensor problem". The service manual calls the sensor the inlet water thermistor and says the code resets automatically.

Can I fix Daikin Altherma 80-00 myself?

Engineer only (engineer visit). Start with: read the help text; use emergency heating if you need it. Call your installer. Daikin's service manual lists a faulty inlet water thermistor or a faulty hydro PCB as the causes.

Is Daikin Altherma 80-00 worth repairing?

Worth fixing. Replacing a sensor is a fairly small job. If the hydro PCB is at fault it costs more, so ask for a quote.

Checked against

Last reviewed October 2026. Manufacturers update their pages, and your manual is the final word. Spotted a mistake? Email contact@appliance-error-codes.com.

Another code on the display?

Look it up in seconds

344 codes from 24 brands, each one checked against the maker's own manuals and support pages.

↑ ↓ to moveEnter to openTip: add the brand, like samsung 4e